How to Save Water at Home

In your own household, the key to maintenance of electronic and water supply is in your hands. Water leaks and damages could cause you major financial and supply losses. In order to check water leaks on your house, you must know basic water repairs. Be aware of the causes of leaks. There are several reasons why water leaks occur:

save water

1. Your Pipelines

Incorrectly made pipelines or insufficient support could lead to water leaks. Excess numbers of pipelines could also be a reason because the base may not be able to handle the pipe’s weight. Second, be concerned about the materials of your pipelines. When buying these materials, make sure to purchase the appropriate supplies without defects because failing to do so could lead your pipe to rust. Lastly, make sure not to use equipment that may harm your pipelines. Too much pressure caused by hammers could bring about water leaks. Depending on your geographic location, you may want to make special precautions for your pipes to ensure they can withstand very cold temperatures such that, during the winter months, water does not freeze within the pipes and expands, causing pipes to burst.

2. Learn How To Read Your Water Meter

Being able to use this could very well be the absolute easiest way to detect leaks on your own. Read your water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, there is a water leak! This could be something as simple as a leaky bathtub, or as horrendous as a leak inside a pipe deep within one of your walls, causing untold damage to your home.

3. Leak Detection Tips

In detecting water leaks, make sure that all of your appliances inside your house that make use of water are turned off. Then inspect the status of the meter dial and wait for 20 minutes. If the dials didn’t shift, you have a home with water pipes that are stable. But if the dials shift, check all of your appliances that makes of use water. If all are turned off, there might be a leak in your underground pipes. The reading on your meter should be greater than your bill from the time when you have used your water since the meter was read.

4. The Lawn Method

Another method to check water leaks is by opening lawn water. If you have a hose, or a water sprinkler, open it and start to watch the water meter’s movement for a minute. The whole rotation of the meter hand stands for 7.5 gallons of water. Add up the number of rotation the hand meter completes for each minute and multiple it by 7.5 to know how much gallons of water you consume every minute, every hour, every day and every week. If you know how much water you use up, you will know whether you are paying the correct bills or not. If your bills exceed the computation, you may be having water leakages.

5. Statistics

The average water used in each household is 60 to 200 gallons per person for a day. You will be surprised on how much water you consume every day. By being aware of these causes of water leaks and how to detect them, you will conserve water everyday.

- Remember that every drop of water counts
- Bathrooms take up almost 70% of water used
- Ensure all pipes and faucets are leak-free

6. Food Coloring Technique

Make it a routine to check toilet tanks. By adding a small amount of food color, you will be able to know if the toilet is leaking. Add food color to the tank. After 20 minutes or so, if the color appeared on the tank, it may be leaking. Try to replace the parts as soon as possible to prevent rust. Conserve water by being aware of water leaks. Learn to save water by checking your own pipes. It will benefit your financial needs. It will benefit your family’s safety. And it will benefit the people of the future who would be able to make use of the wonders of water.

Return from Save Water to Pay Less